|
Marcegaglia storage systems division
Compactable warehouse
The compactable system consists of sliding-on-rails shelving that exploit as
much storage area as possible.
The shelves remain normally closed; among them only an aisle
at a time may be
entered, the access/storing one, by means
of a manual/automatic device.
This technology applies both to light and grand warehouses
(e.g. industrial facilities),
also in the shuttered shelves version,
that is especially suitable for offices,
archives, pharmaceutical stores, warehouses of spare parts and consumers goods.
Characteristics
• Maximum space exploitment: no aisles between the shelves, except for
one.
• Goods protected from dust through special rubber trimmings and hermetic
sealing.
• Adaptability to any kind of pavement. Rails may be either fixed or hidden
into the pavement.
• Silent operating.
• Three handling systems:
- manual: the movement is generated by the operator that pushes on the handles
fixed to the shuttered shelves sides;
- mechanical: each trolley is equipped with a manual operating system consisting
of wheel, gear down and transmission group;
- electro-mechanical: motorized motion, each trolley is equipped with one or
more motor-reducers. A small control panel is installed on each shelf side;
the operator making an aisle open triggers the ‘cascade’ motion
of all other trolleys in the block.
• Safety (electro-mechanical version):
- restore button;
- safety anti-crushing straps;
- emergency stop button;
- movement block at travel end (micro-buttons between shelves);
- alarm led;
- photocell device (optional): automatic halt of all trolleys in case of people
entering the aisle from the back of the installation.
• Compactable, heavy warehouse - shelves structure:
- Bi-Bloc pallet racks;
- Cantilever shelves, Cantil Dal Senior and Cantil Dal Junior types.
• Compactable, light warehouse - shelves structure:
- slot-in shelves made out of special cold rolled profiles;
- precision holes for supporting pins of metal planks
(adjustable distance);
- cold-formed metal planks with rimmed edges over the whole perimeter and
longitudinally reinforced with one or more pieces of tubing;
- steel coating panels painted with RAL standard colors;
- panels of other colors (on request).
 Publications
 Photogallery>>
|
|
