Marcegaglia storage systems division

Pallet shelving: Bi-Bloc Drive-in

Drive-in shelving with loadable aisles

Accumulation shelving recommended for great amounts of goods with few ID references. According to the ‘First In, First Out’ and ‘Last-In, First-Out’ principle, the palletized load unit are stored into deep tunnels accessible by fork lifts for handling operations. This allows exploiting as much room as possible and eliminating the aisles traditionally required for service purposes.
The drive-in shelving is made with the Bi-Bloc slot-in system, and is completed by the exclusive pallet rack profile of zinc-coated steel.

Capacities
The drive-in is dimensioned for pallets up to 1500 kg,
also in seismic belt areas

Material
• Abutments: high-resistance hot-dip Sendzimir galvanized
steel S350 GD UNI EN 10326
• Planks: high-resistance hot-dip Sendzimir galvanized steel
S 280 GD UNI EN 10326
• Pallet rack profiles: high-resistance hot-dip galvanized
steel S280 GD UNI EN 10326

Characteristics
• Tunnel length: 1350 mm and 1400 mm standard.
• Tunnel height: up to 12 m.
• Safety:
- Anti-unlocking pin/bolt system to prevent bracket detachment;
- Upright protection with painted steel special profiles.
• Accessories:
- Ground slides with respective mouths;
- Pallet stopper.

Manufacturing standards
- CNR UNI 10011/97 e CNR 10022/84
- Norme A.C.A.I.
(Testo unico del 28/06/00 aggiornato al 28/06/02);
- D. Leg.vo 9 aprile 2008, n° 81.

Marcegaglia ha in corso l’adeguamento della gamma produttiva alle seguenti Norme Europee:
- UNI EN 15620:2009 del 11/06/09
- UNI EN 15629:2009 del 19/03/09
- UNI EN 15635:2009 del 19/03/09